| 70-59 TCP/IP ON NT 4.0
TCP/IP ON NT 4.0
STUDY MATERIALS: TRANSCENDER, EXAM CRAM, MOC NT 4.0, SYBEX
I found reading alot of different material rounded my knowledge
the DNS and WINS. Subnetting was easy simple questions if you know
the tables:
mask # of subnets Bit interval # of hosts
192 2 64 62
224 6 32 30
240 14 16 14
248 30 8 6
252 62 4 2
254 126 2 -
255 254 1 -
128 + 64 + 32 + 16 +8 + 4 + 2 + 1
\ \ \ \ \ \ \
192 224 240 248 252 254 255
I passed this monster with 827, really alot of DNS, WINS and DHCP.
Know the utilities:
ping
ipconfig/all/renew/release
nbtstat -n,-R,-c
netstat
route print
tracert
arp -s,-a,-g,-d
lpq
lpr
Performance Monitor and Network Monitor, know the difference between
which will capture frames (Ethernet) and which will chart or log
data to be viewed thru spreadsheet.
You need to know Netbios Name Resolution and Host name resolution
How to integrate WINS and DNS.
How to enable DNS for WINS resolution.
DHCP can only integrate with WINS if you specify the 44/NBNS server,
and /46NBT node type
Know the #PRE #DOM #INCLUDE from lmhosts-file
Exclude UNIX clients from any DHCP scopes
The cache.dns file contain's name to-IP-addressing information
for the Internet's root DNS servers.
For routing you need to enable IP forwarding.
RIP for IP effeciently solves problem of having to update routing
tables.
For DHCP to assign IP addresses to a remote subnet, a DHCP Relay
Agent needs to be set up on router in between subnets to broadcast
requests, or DHCP servers must be on both subnets.
Know the problems when you have an LMHOSTS file and you can remove
the # signs out, example:
147.68.56.54 #APPServer
147.68.22.34 #Dserver
147.68.57.87 #3server
Be familiar with the SNMP manager and agent. Know what a community
name and a trap are.
Know that you need to install TCP/IP printing services to have
an NT 4.0 print server print to a UNIX printing device.
Know the difference between Global, Scope, and Client Options in
DHCP
KNOW the CNAME and MX resource records
Well I had a few scenario questions which involved the DHCP configuration.
Network with 100 workstations and 20 UNIX computers. UNIX computers
never move, TCP/IP is protocol used. DHCP configured with one scope
for each subnet. All Windows based computers are set up as DHCP
clients.
Required results:
1) Every Windows based computer on each subnet must be able to
access the Windows NT Server computers by computer name.
2) Every Windows based computer on each subnet must also be able
to receive its IP address from the DHCP server.
Optional:
1)All UNIX systems should access by hostname any Windows NT Server
computer that is set up as an FTP server.
2) All Windows based computers should access by hostname any UNIX
computer that is set up as an TELNET or FTP server.
Proposed Solution:
1) Set up network routers and forward DHCP broadcasts to all subnets
2) Install Wins server on the network
3) Install DNS server and configure it for name resolution
4) Set up DHCP server to supply all DHCP clients with the IP address
of both the WINS sever and the DNS server.
5) On the DHCP server, exclude the UNIX computers' IP addresses
from the scope.
6) On the WINS server, make static mapping entries for UNIX computers.
Produces required and both optional results in this scenario. However,
there was one right before it that was close but only produced one
of the optional results because they did not install DNS and configure
it for name resolution so the.... Optional Result#1) All UNIX systems
should access by hostname any Windows NT Server computer that is
set up as an FTP server was not achieved.
Overall the test was pretty tough, you had to know alot of information.
Studying payed off!! One more test left, SQL 6.5 admin, and I'll
be an MCSE, get down, get down, get down, get down tonight BABY...oooohhhh.....ooooooohhh!!!
GOOD LUCK!
Bill
|